The Falcon Electronic Deadweight is a quick and inexpensive way to measure static pressure up to 15000 psi.
The gauge is calibrated from -40°C to +60°C so you don't have to worry about the ambient temperature changes affecting the pressure; unlike almost all other electronic pressure gauges.
When using the Falcon, there are two power down modes. It will either power down five minutes after the last button has been pressed, or stay on as long as the pressure is greater than three psi. The latter mode is very useful if a pressure value needs to be monitored at all times.
If the Falcon sees a pressure change of more than 10 psi it will go into a fast sample mode, sampling every ~1/2 second instead of every 3 seconds. This feature is handy when you are using a hand pump to apply pressure to a device for calibration.
The Falcon can capture both minimum and maximum pressure for later viewing, or it has a one touch memory that can capture any reading for later viewing.
The custom made aluminum case and shock absorbing system is designed to take more abuse before being damaged than the typical deadweight. The impact resistant water tight case is big enough to hold most industry standard quick connects and fitting's while still being attached to the Falcon.
In short, we built this deadweight to satisfy the needs of the field operator for toughness, and unparalleled accuracy.